How to Set up SPF and DKIM with Postfix on Linux Server?

Article from here…good job and thanks

Introduction

In the earlier tutorials, you learned how to install and configure Postfix. But, despite doing the correct setup of Postfix and having correct MX, A and PTR record your emails might be getting flagged as spam by few of the major ISPs like Gmail, Outlook. So, in this tutorial, you will learn how to further improve email delivery to the recipient’s inbox by setting up SPF and DKIM on your server.

What are these SPF and DKIM records all about?

SPF (Sender Policy Framework) is a simple email validation system designed to detect email spoofing. It is an authentication protocol which, when used allows senders to specify which IP addresses are authorized to send emails on behalf of a particular domain. To ensure that your customers and brand are protected from phishing and spoofing attacks, you need to authenticate your email with an SPF record.

DKIM is the acronym for DomainKeys Identified Mail. It is an authentication protocol used to validate sending domain names with email messages. DKIM uses cryptographic authentication by inserting a digital signature into the email message header which is later verified by the receiving host to validate the authenticity of the sender’s domain. The DKIM digital signature is created using a unique string of characters encrypted as the public key and stored in your DNS. When a recipient gets your email signed by DKIM, the public key is retrieved from the DNS Records of the sender and is decrypted to authenticate the sender’s domain.

Setup SPF Record

Step 1: Create An SPF Record In DNS Of Your Sender Domain

If you are using example.com as the From/Sender domain in all your emails going through Postfix, then this is the domain for which you have to actually set up the SPF record. And, SPF record can be easily set up by login into your DNS provider, e.g. Godaddy, Namecheap.

Mechanisms can be used to describe the set of hosts which are designated outbound mailers for the domain and can be prefixed with one of four qualifiers:

+    (Pass)
–     (Fail)
~    (SoftFail)
?     (Neutral)

If a mechanism results in a hit, its qualifier value is used.  The default qualifier is “+“, i.e. “Pass”. Mechanisms are evaluated in order. If no mechanism or modifier matches, the default result is “Neutral”.

More in-depth information on the differences between “~” and “–” can be found here

Examples:

“v=spf1 -all”

“v=spf1 a -all”

“v=spf1 a mx -all”

“v=spf1 +a +mx -all”

Evaluation of an SPF record can return any of these results:

Result Explanation Intended action
Pass The SPF record designates the host to be allowed to send accept
Fail The SPF record has designated the host as NOT being allowed to send reject
SoftFail The SPF record has designated the host as NOT being allowed to send but is in transition accept but mark
Neutral The SPF record specifies explicitly that nothing can be said about validity accept
None The domain does not have an SPF record or the SPF record does not evaluate to a result accept
PermError A permanent error has occurred (eg. badly formatted SPF record) unspecified
TempError A transient error has occurred accept or reject

 

Once you are logged in, just create a new TXT record like the one below:

TXT  @  v=spf1 mx ~all

 

Note, there might be a few DNS providers, who will require you to enclose the SPF record with quotes, like the one below:

TXT  @  "v=spf1 mx ~all"

 

Once you have added the SPF records, it might take up to 24-48 hrs to propagate globally over the internet. You can use the dig command to see the current SPF record which is updated globally:

dig example.com TXT

Or you can also use online SPF validators like mxtoolbox.comKitterman.com or spf.myisp.ch

Out of the above online SPF validators, spf.myisp.ch is quite useful because it gives a very detailed view of what all servers/IP addresses are allowed to send emails for your domain.

Step 2: Configuring SPF Policy Agent On Server

By setting up the SPF record for your domain, you have completed a very important step to improve the delivery of outgoing emails to recipient’s inbox. Like the way you did the SPF configuration for outgoing emails, the very same way you should also do the SPF validation for the incoming emails. This will help you to detect the forged incoming emails coming in your network.

First, install the required package for SPF policy agent

sudo apt install postfix-policyd-spf-python

 

The next step is to edit the postfix’s master file master.cf. You can use any of your favourite editor vim or nano to edit the file:

sudo nano /etc/postfix/master.cf

Append the following lines at the EOF. This will tell the postfix to start the SPF policy daemon whenever postfix starts itself.

policyd-spf  unix  -       n       n       -       0       spawn
    user=policyd-spf argv=/usr/bin/policyd-spf

Save and close the file. Next step is to edit the postfix’s main configuration file main.cf.

sudo nano /etc/postfix/main.cf

Add the following lines at the end of the file main.cf. Adding these lines means, you are giving the instructions to postfix to check SPF on incoming emails and reject the emails which are unauthorized.

policyd-spf_time_limit = 3600
smtpd_recipient_restrictions =
   permit_mynetworks,
   permit_sasl_authenticated,
   reject_unauth_destination,
   check_policy_service unix:private/policyd-spf

Save and close the file. You are now done with the SPF setup, just restart the postfix to reflect the changes.

sudo service postfix restart

or

sudo systemctl restart postfix

 

How to see whether the emails which you sent to Gmail are SPF passed?

Open any of the email sent via your postfix to Gmail and click on Show original link as shown below:

Next, you will see a window like the one below, where you will see the status of SPF (whether Pass or Fail) in Gmail.

If you see the below line, then this means SPF is pass:

Received-SPF: Pass (sender SPF authorized)

Setting up DKIM

DKIM can be set up by installing OpenDKIM- an open-source package for setting up DKIM.

sudo apt install opendkim opendkim-tools

Once the installation is successful, you need to add postfix user to opendkim group. By doing this, you are actually linking DKIM with your Postfix installation:

sudo gpasswd -a postfix opendkim

Next step is to edit the main configuration file of the OpenDKIM:

sudo nano /etc/opendkim.conf

Change the below-highlighted content in the main configuration:

# This is a basic configuration that can easily be adapted to suit a standard
# installation. For more advanced options, see opendkim.conf(5) and/or
# /usr/share/doc/opendkim/examples/opendkim.conf.sample.

# Log to syslog
Syslog          yes
# Required to use local socket with MTAs that access the socket as a non-
# privileged user (e.g. Postfix)
UMask           002

# Sign for example.com with key in /etc/mail/dkim.key using
# selector '2007' (e.g. 2007._domainkey.example.com)
#Domain         example.com
#KeyFile        /etc/mail/dkim.key
#Selector       2007

# Commonly-used options; the commented-out versions show the defaults.
Canonicalization  relaxed/simple
Mode            sv
SubDomains      no
#ADSPAction             continue
AutoRestart       yes
AutoRestartRate         10/1M
Background          yes
DNSTimeout          5
SignatureAlgorithm      rsa-sha256

# Always oversign From (sign using actual From and a null From to prevent
# malicious signatures header fields (From and/or others) between the signer
# and the verifier.  From is oversigned by default in the Debian pacakge
# because it is often the identity key used by reputation systems and thus
# somewhat security sensitive.
OversignHeaders     From

# List domains to use for RFC 6541 DKIM Authorized Third-Party Signatures
# (ATPS) (experimental)

#ATPSDomains        example.com

#OpenDKIM user
# Remember to add user postfix to group opendkim
UserID                 opendkim

# Map domains in From addresses to keys used to sign messages
KeyTable            refile:/etc/opendkim/key.table
SigningTable        refile:/etc/opendkim/signing.table

# Hosts to ignore when verifying signatures
ExternalIgnoreList  /etc/opendkim/trusted.hosts

# A set of internal hosts whose mail should be signed
InternalHosts /etc/opendkim/trusted.hosts

Once changes are done, save and close the file.

Create Signing Table

In order to create the signing table, you need to first create a directory structure for OpenDKIM. Execute the following commands to configure the same:

sudo mkdir /etc/opendkim
sudo mkdir /etc/opendkim/keys

Change the permission and role:

sudo chown -R opendkim:opendkim /etc/opendkim
sudo chmod go-rw /etc/opendkim/keys

Execute the following command to create the signing table:

sudo nano /etc/opendkim/signing.table

then add the following lines in the above file:

*@your-domain.com    default._domainkey.your-domain.com

Save and close the file.

Create Key Table

Execute the following command to create the key table:

sudo nano /etc/opendkim/key.table

Once created, add the following lines in the file:

default._domainkey.your-domain.com     your-domain.com:default:/etc/opendkim/keys/your-domain.com/default.private

Save and close the file.

Create The Trusted Hosts File

Execute the following command to create the trusted table:

sudo nano /etc/opendkim/trusted.hosts

Once created, add the following lines in the file:

127.0.0.1
localhost

*.your-domain.com

Adding the above line means that emails coming from the mentioned IP addresses and domains will be trusted and signed.

 

Generation of the Private and Public Key for DKIM

DKIM is going to be used for signing outgoing emails. So, you need to generate both private and the public key for DKIM. The private key will be used to signing and the public key which will be published in the DNS will be used for remote verification.

Create a folder for your domain for which DKIM to be signed

sudo mkdir /etc/opendkim/keys/your-domain.com

 

You can use the opendkim-genkey tool to generate the keys

sudo opendkim-genkey -b 2048 -d your-domain.com -D /etc/opendkim/keys/your-domain.com -s default -v

Once you will execute the above command, two files will get generated:

1. This file will contain your private key.

/etc/opendkim/keys/your-domain.com/default.private

2. This file will contain your public key which you need to add in the DNS record of your domain.

/etc/opendkim/keys/your-domain.com/default.txt

 

Change the ownership of the private key file:

sudo chown opendkim:opendkim /etc/opendkim/keys/your-domain.com/default.private

 

Configure Public Key in DNS Record of Domain

Get the public key by doing cat:

sudo cat /etc/opendkim/keys/your-domain.com/default.txt

Copy the record, and log in to your DNS manager e.g. if your DNS is with GoDaddy or Namecheap, then login to their dashboard and add the following DNS record:

 

 

Testing Your DKIM Configuration

Execute the following command on your Ubuntu machine to test your keys:

sudo opendkim-testkey -d your-domain.com -s default -vvv
in my server i need to use mail instead of default because it's a prefix I used in the configuratioon

If the setup is correct, you will get the following message:

key OK

 

Integrate Postfix to OpenDKIM

Postfix can connect with OpenDKIM via Unix socket i.e. /var/run/opendkim/opendkim.sock. But, we need to change the file path because the SMTP daemon which comes with Ubuntu resolves all filenames relative to the Postfix queue directory (/var/spool/postfix).

Create a new directory to keep the OpenDKIM socket file

sudo mkdir /var/spool/postfix/opendkim

sudo chown opendkim:postfix /var/spool/postfix/opendkim

The next step is to edit the socket conf file.

sudo nano /etc/default/opendkim

Search for the following line:

SOCKET="local:/var/run/opendkim/opendkim.sock"

And, replace it with the following:

SOCKET="local:/var/spool/postfix/opendkim/opendkim.sock"

Save and close the file.

Note: You need to do similar changes in the opendkim.conf file too:

sudo nano /etc/opendkim.conf

Search for the following line:

Socket                  local:/var/run/opendkim/opendkim.sock

And, replace it with the following:

Socket                  local:/var/spool/postfix/opendkim/opendkim.sock

 

Next step is to edit the Postfix main configuration file:

sudo nano /etc/postfix/main.cf

Append the following lines after smtpd_recipient_restriction section in the main.cf file.

# Milter configuration
milter_default_action = accept
milter_protocol = 6
smtpd_milters = local:/opendkim/opendkim.sock
non_smtpd_milters = $smtpd_milters

Save and close the file.

You are now all done. Just restart opendkim and postfix service to reflect all the changes.

sudo service opendkim restart
sudo service postfix restart

Now, your Postfix setup is ready with the SPF and DKIM. You can also visit the official Ubuntu community page for additional detailed documentation on SPF and DKIM set up.

Quick Question: Do you know about DMARC policy? It’s another crucial component of email authentication.

Keep reading the tutorials and blogs to get deeper into email delivery. Rate us if you loved the article.

Leave a Reply